|
All post and rail styles use 127mm x 127 mm PVC posts and 140mm x 38mm
PVC rails. Posts are spaced at 2.4 metre intervals and rails are supplied
in 4.8m lengths.
Standard finished post height for 1, 2 and 3 rail is 1200mm above
the ground with 600mm below ground. Standard finished height for 4 rail
is 1500mm above ground, with 700mm below ground.
Different height combinations are available on request. All PVC posts
are pre-routed in our factory, according to a drawing of the fence layout
prepared by either a fencing installer or the customer. Blank PVC posts
can alternatively be routed on-site to allow for inclines and corners
other than 90 degrees and other irregularities in terrain.
We can also pre -route posts in our factory to accomodate sloping ground,
subject to certain conditions. Please contact us for details.
The standard PVC colour is white, but other colours
are available. See our colours page
for more details.
We have one, two, three and four rail styles as follows:
Please enquire about our single rail styles. They include pre-routed
holes to accomodate electric or standard wire at various spacings.
Post and Rail Gates
Our gates are built to last, with our quality PVC on the exterior
and a complete galvanised steel frame on the interior. Our gates include
all the necessary components required to install the gate.
Our gates are available in 3 or 4 rail styles as follows:
PVC Gate Lengths
Gates are available in our standard sizes listed below.
Standard physical gate lengths (exact actual gate size, not opening!)
Please allow
40mm clearance for single gates, and 60mm clearance for double gates.
- 1.2m with Cross Brace
- 1.5m with Cross Brace
- 1.8m with Cross Brace
- 2.4m with Cross Brace
- 2.7m with Cross Brace
|
